NINGBO BRANDO HARDWARE CO.,LTD
모형: CA25T
상표: 브란도
포장: 상자, 판지, 케이스, 팔레트
생산력: 100000pcs per month
수송: Ocean,Land,Air
원산지: 닝보, 중국
지원에 대한 지원: 100000pcs per month
인증 : CE.ISO
포트: Ningbo,Shanghai,Tianjing
지불 유형: L/C,T/T,Paypal,Western Union
인 코텀: FOB,CFR,CIF,EXW,FCA,CPT,CIP
CA25T 공압 전자기 펄스 밸브
|
Use period
|
Failure phenomena
|
Possible Reason
|
Troubleshooting
|
|
During installation and commissioning
|
The valves cannot all be opened, but the leading part does act.
|
Check the gas dome pressure to see if it is too low.
|
Check the leakage
|
|
Some valves do not work, but the others are normal.
|
Check the valve coil connection and coil
|
Replace the accessories
|
|
|
The valves cannot all be closed. There is leakage. There is no way to establish a gas dome.
|
Y-valve. Some valves for the same gas dome are leaking, thus causing leakage for all the valves.
|
Check the leakage
|
|
|
Z-valve. The valve inlet and blowing muzzle are installed backwards.
|
Re-install
|
||
|
Some valves cannot be closed. There is leakage.
|
There is some dirt or debris on the membrane, ii is blocking the moving iron core.
|
Clean the membrane and check that the membrane is complete. Check the moving iron core and air lock.
|
|
|
A valve closing is slowly.
|
The membrane orifice is blocked.
|
Dredge the membrane orifice
|
|
|
During use period
|
Some valves are leaking. The membrane cannot close tightly and the valve is always open a
little.
|
There is some dirt or debris on the membrane, the leading part is damaged. Moving iron core is blocked.
|
Clean the membrane and check that the membrane piece is complete. Check the moving iron core and the air lock. Replace the accessories if necessary.
|
|
Coil is hot and burned out.
|
It has been turned on for too long.
|
Check the working condition of the control system.
|
|
|
Voltage exists but the valve does not operate.
|
Membrane is damaged and the orifice is blocked.
|
Replace the accessories in time.
|
|
|
Ambient temperature is below -20℃. The valve is leaking and cannot open.
|
Ambient temperature is too low and here is frost in the valve.
|
Pay attention to insulation and maintaining proper temperatures.
|
시스템에서 유지 보수 활동을 수행하기 전에 구성 요소가 압력 및 전원으로부터 완전히 분리되었는지 확인
밸브가 완전히 조립 될 때까지 압력과 전원을 다시 공급해서는 안됩니다.
매년 실시해야합니다.
우리 제품의 장점 :
밸브 본체와 커버는 다이 캐스트 컴팩트하며 투명한 페인트로 덮여있어 내 부식성을 향상시킵니다.
다이어프램의 씰 패드는 금속과 고무로 만들어져 단단하고 누출되지 않습니다.
전자기 리더 헤드 흡입, 민감하고 안정적인 작동.
서로 : 동일한 모델, 다른 모든 제품의 사양, 부품은 보편적이며 상호 교환 가능합니다.
안정적이고 안정적인 성능, 다이어프램의 수명은 백만 회 이상에 달합니다.
문의 바랍니다!
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now